When laying hanging wire, you should first have a good choice of strand wire rack with a tray placed on the turntable device,
Then rotate the turntable to put line the shelves began to put the line:
Then rotate the turntable to put line the shelves began to put the line:
Generally use the following three methods.
1. The hanging wire hanging wire resting on pole groove plywood inside and outside of the nut to tighten slightly, so as not to emerge hanging wire trunking for the degree, then you can use manual traction.
2 hanging wire on the poles and plywood between the nut, but in a straight line from the pole with all the tension every corner bar and turn on the 6 pole line (ie, outer corner pole), still the hanging wire on the inside groove plywood
3 wire cloth hanging on the ground first, then moved manually put on piecewise hanging wire nut between the poles and plywood (generally stick a fork). However, using this method must not make the hanging cord is damaged, do not hinder traffic, does not make the pole hanging wire can not be cited as the principle.
4 In the course of laying hanging wire should be possible to use the whole strand to reduce intermediate connector and ask in a bar file can not have more than one connector.
For more overhead cable information, Please visit www.qscable.com.
